How To Remove Mold From Your Roof in Elk County, PA

Even in the dry climate of Elk County, PA it's important to take care of mold quickly. Find out how to remove mold from your roof and other surfaces with these 7 remedies.

How To Remove Mold From Your Roof in Elk County, PA

How To Remove Mold From Your Roof in Elk County, PA

Mold can be a serious problem in humid climates, and it can quickly spread to other areas of your home. This is why you want to know how to get rid of it as fast as possible. The process is not difficult, but it does take time. Mold can cause health problems such as headaches, sore throats, skin irritations, and flu-like symptoms if it’s left untreated. Not only do you need to make sure that the mold is gone from the roofing material itself, but you also need to make sure that there isn’t any leftover residue on the exterior of your house or building. Here are some tips for getting rid of mold from roofs in Elk County:

Manicure shade trees

Molds and fungus can grow on trees if they aren't properly maintained and if they have an abundance of drippings that get onto your roof or walls. Try not to allow them to drop seeds on your property either, because these could also be adapted by mold or fungus.

Keep gutters clean

Keeping the inches of water that pour down your gutters clean is critical for preventing mold growth. The key is to make sure the water doesn't sit around in gutters and swamps over the winter months. It's important to keep the house free of leaves, debris, and snow (particularly if you have a leaking roof). Make sure your drains are working properly, too.

Install ridge vents

Ridge vents provide air circulation and help prevent condensation buildup on your roofing material, which may harbor mold spores. If you have gutters, they should also help keep water out of the attic and from building up on your roofing material until it drips down into a gutter.

Apply moisture and/or microbial barrier

The moisture and microbial barrier will keep mold from growing on your roof even if you don't have ridge vents or gutters. To create one, spray paint or apply a silicone sealant over the entire roof surface and onto any flashing at the bottom of a building wall or around windows and doors. The barrier creates an effective barrier against moisture penetration to prevent mold from taking hold of your roof.

Apply a Bleach Solution

To effectively kill mold, you'll have to be able to reach every corner of your roof, so use a ladder if necessary. After treatment, clean the roof with an effective roof cleaner that contains bleach, such as Scotchgard or Kilz. If you find molds in the wood shingles, you'll have to remove those first and replace them before repairing the plywood sheathing that lies underneath.

Install copper or zinc strips

If there is already mold present, work with a professional to deal with it correctly and safely. In many cases, you can install copper or zinc strips around the perimeter of your house to keep rainwater from getting into areas where mold might grow. Also, consider installing a special venting system for air exchange purposes. While these measures will help minimize mold growth, you should still take care when handling any damaged materials that might be harboring spores.

Signs of Molds on your Roof

Molds are common on roofs. They often grow in wet and humid conditions, such as those found near leaky gutters or clogged downspouts. Molds love to grow on flat surfaces, such as roofs that lack slopes. If you have a flat roof, you may want to take a closer look at it for signs of mold growth. Here are some ways to spot mold on your flat roof:

Musty smell

Even though they're invisible, mold spores are everywhere in the air we breathe, on our food, and even on our clothes. Mold is also a natural part of the environment, so it's not as unusual as you think for mold to grow in your home and get into your fixtures. The most common way for mold to get into a home is through leaks or plumbing leaks. When water from a broken pipe seeps inside your home, the resulting moisture can trigger mildew, black spots, and other growths that look like mold but are not the same thing at all.

Water stains on your ceiling

Sometimes you don't notice water stains on your ceiling because they're more obvious when they're on walls or other vertical surfaces that reflect light into ceilings but don't absorb moisture from condensation. Your ceiling is also an important barrier against airborne allergens like dust mites and pet dander, so if there are any signs of water damage or leaks.

Drywall cracks and crumbling paint

Cracks and crumbling drywall are signs that moisture has damaged the surface of your ceiling. These problems can lead to mold growth in the future. Crumbling paint is often caused by water damage from rain, but it can also be caused by leaky roofs or condensation in cold climates.

Dark Spots on Ceiling

Dark spots on the ceiling that are visible from the ground level are common signs of problems with your roof. Old shingles can come loose and cover up the framing underneath, which leads to moisture problems over time.

Soffit Discoloration

Soffits can discolor over time due to condensation buildup inside your house, or because you've painted over old wood siding with newer siding that wasn't painted properly. This discoloration isn't harmful it's more of a cosmetic issue than anything else but it could be an early sign of rot beneath that you should have inspected sooner.

Types of Molds

Different molds on your roof can be the difference between a lifetime of trouble and no problems at all. A few are harmless, while others can cause serious health issues if they grow unchecked. 

Aspergillus grows in warm, moist environments and is often found in areas that have been damaged by water leaks or flooding, such as attics, basements, and crawl spaces

Alternaria is an airborne mold that grows on foods (especially fruits and vegetables) and on fabrics, carpets, upholstery, and other materials that come into contact with these foods. It can also grow on wood and paper products such as cretonne

Chaetomium is a type of thick-walled, golden-colored mold that grows on plants such as apples and pears. It tends to be a relatively small colony, but it can be very pervasive in the environment if it has been present for some time

Mucor is a type of fungus that feeds off a dead organic matter in the soil. Molds like this are usually found in damp locations such as basements or walkways near buildings with standing water.