How To Remove Mold From Your Roof In Montour County, PA

Mold growth can be an embarrassing problem. But if you have a leaky roof and have had a mold problem, it may be time to hire a professional mold remediation company to get rid of the mold in Montour County. Continue reading to get some of the best tips!

How To Remove Mold From Your Roof In Montour County, PA

How To Remove Mold From Your Roof In Montour County, PA

Mold is a common problem in homes, especially in the bathroom and kitchen. While most people understand that having mold in their homes can be dangerous to their health, many don’t think that mold can also accumulate on their roofs and cause damage. Removing mold from your roof isn’t as simple as removing it from other areas of your home, but you must do so to ensure that your roof does not sustain any damage in Montour County. 

Guidelines for Preventing Mold Growth on Your Roofs

Removing Molds keeps your home safe and sound. Unfortunately, the condition of your roof can be left undetermined for years at a time. Its big deal, your roof can be the perfect breeding ground for mold. To ensure that this never happens, here are 8 tips on how to keep mold from growing on your roofs:

Keep It Clean

Mold grows best in dark places where moisture is allowed to collect. To ensure that this doesn't happen on your roof, you'll need to take care of it regularly. This means sweeping away leaves and other debris collected on top of the house to prevent mold growth.

Keep Gutters Free from Debris

Gutters clog with leaves and other debris throughout the fall months. However, it's important that you make sure they're free of debris since water can collect in them if they're clogged and lead to mold growth and water damage in your home.

Trim Back Overhanging Branches

You should also keep any vegetation near your house trimmed. If plants are allowed to grow too large, they could block sunlight from getting to the roof and even cause branches and debris to fall onto the roof. This can cause damage that can result in leaks, allowing for mold growth. Keeping vegetation trimmed will help prevent this from happening.

Have your roof inspected regularly

Proffesional inspection by a roofer helps reveal hidden mold growths before they become visible. A pro will identify all the areas that need repair to avoid the risk of future mold growth. Do an inpection after a major storm or at least twice a year to ensure no mold growth on your roof.

Keep Trees Away from Your Roofs

As usually trees are usefull in a compound setting, but they can also cause problems. As trees grow, their branches will often extend over the top of your house. There can be damage to your roof and the seals around your windows and doors. It often causes moisture buildup, which can lead to mold growth.

Effect of molds on roofs

The effects of mold on roofs can be devastating. Mold may start in a tiny spot, but it can quickly spread, eating away at your roofing. Even if you don’t spot mold, it’s always good to get a professional roofing contractor to inspect your roof for any problems after a big storm or high winds.

Black streaks

Black streaks are usually caused by algae and fungus that feed on the limestone filler used in asphalt shingles. This is most common in moist, warm climates. The streaks and stains will show up on the north side of your home first because they don’t receive direct sunlight. This algae doesn’t pose any structural threat to your shingles and will not cause any damage other than cosmetic. The algae and fungus help extend the life of your shingles by slowing down the deterioration process due to ultraviolet rays. 


Excessive moisture in buildings has been linked to asthma development and increased severity of asthma symptoms. Dampness also causes rot and decay, weakening structures and making them hazardous.

Respiratory Infections

Little kid spend most of their time on the flow as they crawl around on their hands and knees, so they are likely to inhale mold spores close to the floor where these concentrations tend to be highest. Children are at higher risk for respiratory infections from breathing in the mold than adults.

Types of molds

Molds are microscopic organisms found everywhere and can grow on almost any substance when moisture is present. They digest organic matter and subsequently destroy the material they grow on. Molds proliferate through the use of microscopic spores; the spores are invisible to the naked eye and float freely in both outdoor and indoor air. Mold can begin to grow indoors when mold spores drop on surfaces. There are numerous forms of mold, and none of them will grow in the absence of water or moisture. Types of mold that affect roofs are;


When it appears on your roof, it appears as a black spot. The color can vary from green to black or brown. If you notice this mold growing on your roof, call a mold remediation company immediately because within a short while they become very dangerous to any of your loved ones with weak immune systems.


This mold is ussually spotted on cellulose materials like drywall and cardboard. It appears as a white to greyish spot with a cotton candy texture when it grows on your roof. When exposed to air, it changes its color to grey or brown. It spreads very fast and is extremely toxic because airborne spores can cause pulmonary edema in humans when inhaled over time. 


Aspergillus is a prevalent indoor and outdoor mold. It causes health issues such as allergic reactions or respiratory problems, but it does not generally cause severe illnesses in healthy people.


Mildew does not produce as many health problems as other molds, but it can cause structural damage when left untreated. Mildew is not just unsightly; it also produces a musty odor and causes discoloration to surfaces throughout your house, including walls, ceilings, and furniture.